Securplumb SR25 Reducer Tee Solder Ring 22 x 15mm Pack 5

Securplumb SR25 Reducer Tee Solder Ring 22 x 15mm (Pack of 5)

High-Quality Tee Fitting for Copper Pipework Transitions

The Securplumb SR25 Reducer Tee Solder Ring is a premium-grade plumbing fitting designed to connect three copper pipes in a T-junction configuration while transitioning between pipe sizes. Specifically crafted to connect two 22mm pipes with a reduced 15mm branch, this fitting is ideal for splitting main flow lines into smaller branches or fixture feeds.

With an integrated solder ring, the SR25 offers a clean, reliable, and fast method of joining copper pipes without the need for additional soldering material. It is the preferred solution for both professional plumbers and contractors seeking dependable performance and simplified installation across domestic and commercial systems.

Product Details

• Product: Securplumb SR25 Reducer Tee Solder Ring

• Size Configuration: 22mm x 22mm x 15mm

• Pack Size: 5 fittings per pack

• Boxed Weight: 230g

• Material: High-grade copper alloy with factory-applied solder

Key Features

• Pre-Soldered Ring: Each fitting includes a built-in solder ring that melts upon heating to form a durable, watertight seal.

• Size-Reducing Tee: Connects two 22mm pipes with a 15mm off-branch, perfect for reducing flow to appliances, radiators, or secondary zones.

• Durable Copper Construction: Resistant to corrosion and suitable for use in potable water systems and central heating circuits.

• Time-Saving Design: The integrated solder dramatically reduces installation time and improves consistency across joints.

• Leak-Free Performance: Engineered for high-integrity sealing in both hot and cold water applications.

• Compact & Versatile: Ideal for new installations, retrofits, and tight-space applications.

• Professional Grade: Trusted for use in high-demand residential and commercial settings.

Typical Applications

• Splitting 22mm supply pipes into 15mm branch lines

• Connecting radiator feeds to a central heating circuit

• Reducing supply to outlets requiring lower flow rates

• Zoned heating or plumbing systems requiring size transitions

• Ideal for both renovation and new construction projects

Installation Instructions

1. Pipe Preparation: Cut the copper pipes to size and remove any burrs using a reamer or deburring tool.

2. Clean Surfaces: Use emery cloth or a wire brush to clean the outside of the pipes and the inside of the fitting.

3. Apply Flux: For optimal results, apply a thin layer of flux to the mating surfaces.

4. Assemble the Joint: Insert the 22mm and 15mm pipes into the appropriate sockets of the tee fitting.

5. Heat the Joint: Apply even heat with a propane or MAPP torch. When the solder melts and a small bead appears at the edge, the joint is complete.

6. Cool Naturally: Allow the joint to cool undisturbed to set the seal.

7. Test System: Once cool, perform a pressure test to confirm leak-free performance.

Care and Maintenance

• Storage: Keep fittings in a dry location to avoid tarnishing or oxidation of the solder ring.

• Handling: Do not drop or crush the fittings, as it may deform the solder ring or the fitting body.

• Inspection: Check for signs of corrosion or joint wear during system maintenance.

• Clean Installation: Always clean and prepare the pipework properly to avoid joint failure.

Frequently Asked Questions (FAQ)

Can this be used in heating systems?
Yes, the SR25 is suitable for both domestic hot and cold water and sealed central heating systems.

Do I need to use extra solder?
No, the pre-loaded solder ring is sufficient for most standard installations. Flux should still be applied.

Is it suitable for DIY use?
Yes, for users with basic plumbing and soldering experience. For best results or in high-pressure systems, professional installation is recommended.

Is it WRAS approved?
Securplumb fittings are made to comply with UK plumbing regulations. For specific approvals, consult your supplier or local standards.

Why Choose the Securplumb SR25 Reducer Tee Solder Ring?

The Securplumb SR25 combines practical design with high-quality manufacturing to deliver dependable, leak-free joints with minimal effort. Its pre-soldered ring ensures quick, clean, and consistent connections, while its reducer configuration offers flexibility in layout planning and system scaling. Perfect for modern heating and plumbing networks, this fitting supports the seamless integration of diverse pipe sizes with professional-grade confidence.

Securplumb SR25 – Trusted Performance. Simplified Connections. Cleaner Installs.